Rear Adhesive LED SPOILER For Audi Q2 | Roof SEQUENTIAL LED Strip in Black Carbon Fiber Effect

Description

Rear Adhesive LED SPOILER for Audi Q2, Roof-Trunk | 3 Dynamic LED Functions | Black Carbon Fiber Finish, in New Flexible EPDM

- NEW LED LOOK | Renewed and Aerodynamic Look Inspired by Recent Cars with LED Technology
- 3 LED FUNCTIONS | Dynamic Power On LED Strip; Fixed Light during the March; Intensified Light in Braking
- IP68 RESISTANCE | New Thickened EPDM Thermal Compound, Weather Resistant
- EASY INSTALLATION | Perfect Adhesive Adhesion, and Simplified Connections.


THE PACKAGE INCLUDES:

- 1 Flexible LED Rear Spoiler Lip


FUNCTIONS:

- Sequential Light at Ignition, Red
- Daytime Running Light, Red
- Brake Light when Braking, more Intense Red


INFO:

ADHESIVE FLEXIBLE REAR SPOILER, WITH LED TECHNOLOGY, IN A NEW BLEND OF RUBBERIZED EPDM, BLACK CARBON FIBER EFFECT

189 LEDs Integrated in the Spoiler Form a Bright Red LED Band, with a Dense Light Inspired by the Latest Technologies, with 3 Distinct Functions:

- When the vehicle or the lights are switched on, the red LED dynamically composes itself in red strokes to form the red LED strip.
- Daytime Running Light, while the vehicle is in circulation, the Red LED Strip remains in Stable Function, like the Vehicle Running Lights.
- Switching on the Stop Lights During Braking, when the brake is pressed, it provides a single dynamic function, and the LEDs light up from the center towards the outside of the spoiler, with intensification of the red light; when the brake is released, the light returns to steady and less intense.

The LED Rear Spoiler is an Excellent Product, in the Quality of Materials, Finish, Details and Feel; in addition to the impact aesthetics, which renews the look of the car, the Inevitable Increase of Road Safety is to be considered, as it is an element of marked visibility and signaling of the vehicle.

Produced in a new blend of Thermal EPDM in Carbon Look finish, tested for years to withstand bad weather and travel debris, without losing its color over time.
Easy adhesive installation and maximum malleability, for a perfect adhesion.

COMPATIBILITY:

- Specific for Audi Q2


ASSEMBLY:

- Wash and thoroughly clean the surface where the spoiler is to be applied

- Remove the 3M adhesive film, and adhere the spoiler to the desired part

- Connect the 3 Wires, Respectively:

BLACK: Connect to Neutral Ground
RED: Connect to the Base Lighting System
WHITE: Connect to the STOP light switch-on function

(For a perfect fixing, use a bodywork thermal hair dryer)

It is possible to cut and then shorten the spoiler from the side where the wire is not present, but this modification will inevitably involve the decentralization of the Dynamic LED function.





FOR OPTIMAL MOUNTING, EVEN IF SIMPLE REPLACEMENT, WE ALWAYS RECOMMEND THE INSTALLATION OF AN EXPERT, as we do not assume responsibility for articles mounted and subsequently detached. We trust in your common sense.