HB4 LED Kit for CHRYSLER PT CRUISER Facelift Low Beam CANbus Bulbs | 6500K Cool White 8000LM

Description

LED Low Beam for CHRYSLER PT CRUISER Restyling | Led Bulbs HB4 for Professional Conversion FROM HALOGEN HB4 TO LED | 8.000 LUMEN 6500K Cool White, CANBUS NO Error, NO Modify.

** Only Facelift from 2006 (for Pre-Restyling look for the correct bulb in our Store) **

**SUPPLIED WITH: 2 X Resistor Filters**

LATEST TECHNOLOGY OF EXCELLENCE FOR VEHICLES AND BIKES

- Adjustable Ring 360°
- Less Space Requirement Guaranteed
- Excellent Lighting 4000 LUMEN
- Copper Mesh Dissipation


THE PACKAGE INCLUDES:

- 2 HB4 LED Lamps, with Adjustable Ring
- 2 Canbus Filters (Integrated)


INFO:

- SMALLER SIZE GUARANTEED:
It is currently the copper dissipation kit, including control units, SMALLEST EVER PRODUCED and present on the market

- COPPER DISSIPATION:
Now established, it far exceeds the classic cooling systems; COPPER MESH Heatsink offers a larger surface area of heat dispersion, guaranteeing RELIABILITY and DURABILITY

- LIGHTING OF EXCELLENCE
4 Chip Zes Plates (Philips Factory), able to reach 8.000LUM of power and an ICED color of 6500 Kelvin degrees

- IT HAS HB4 SOCKET, LIKE YOUR HALOGEN
Plug & Play installation, it does not require drilling or wiring adaptations. They have a 360° ADJUSTABLE RING, for perfect positioning inside the headlight.

- CANBUS, ERROR FREE
Equipped with CANbus ULTRA-Slim control units 49mm x 17mm x 10mm



NO MORE XENON BECAUSE:

- The high power of this new type of LED leads it to overtake the traditional XENON, so much so that Brand New Cars from the best car manufacturers are already adopting it on a large scale.

- Unlike Xenon, they do not have internal "consumable" gases, for this reason they are longer-lived, more reliable and never lose their original Brightness or Color over time.

- Unlike Xenon, they do not need to heat up to deliver their maximum light output, the Ignition is IMMEDIATE, as well as the response to the change between low and high beam.

COMPATIBILITY:

- For CHRYSLER PT CRUISER Facelift (from 2006), Low Beam

** Only Facelift from 2006 (for Pre-Restyling look for the correct bulb in our Store) **


FOR AN OPTIMUM MOUNTING, WE RECOMMEND:

- DISMOUNTING YOUR HALOGEN BULBS

- CHECK FIRST: Connect only the led socket (PLUG AND PLAY ); if there is not any problem, proceed with mounting operations.

- BLOCK ONLY THE LED RING: Remove the led ring from the led bulb using circular motion and fix in the locking clip of the halogen bulb.

- IMPORTANT: THE LIFE OF THE LED DEPENDS ON THE HEATSINK: Open the copper heatsink as much as possible, till you obtain a "rose shape" heatsink. Extend each heatsink, don' t be afraid to use force.

- CONNECT THE SOCKET AND LOCK THE BULB: Put the bulb inside its ring that you had previously fixed, and lock it using circular motion.




NON-STANDARD CASES


- DEEPER DUST CAPS:

Being a TRANSFORMATION kit, and not replacement bulbs, it has bigger dimensions.
If the installation of the kit does not allow to close the headlight anymore, visit our store for DEEPER DUST CAPS.

- ADAPTERS:

All cars that do not have the STANDARD LOCKING CLIP to lock the halogen bulb, may need simple ADAPTERS; found them in OUR STORE.
IMPORTANT: Their compatibility could not always depend on the model of your car; it depends mainly on the LOCKING SYSTEM of the halogen bulbs of your headlight.




We do not take responsibility for: erroneous purchases - violations of regulations or laws of any state - damages, which you may cause to you, to third parties or to the same article, as we describe each individual specification in detail.